Drill2Water, LLC
Water Well Drilling Rigs - Model Water-TCD                  tel: 512-944-7614
Model Water-TCD may change slightly in
appearance depending on options selected or
modifications requested by the customer.


Drill2Water, LLC
1308 Midmorning Drive
Austin, Texas  78737  USA
512-944-7614  office
866-812-9036  fax

Hours:  Mon-Fri: 9:00 am-4:00 pm CDT

(c) copyright  - All Rights Reserved
rig Model Water-TCD to
To convert well drilling a
Geothermal Drilling Rig
please add
$12,000.00
for the purchase and
installation of mixer/grout
pump and tremie hose
reel, or save money by
supplying your grout
pump and tremie hose
reel to be installed.
Custom Well Drill Equipment
Borehole Drill Machine
Water Well Drilling Rigs photo
Model Water-TCD  -  
Tophead rotary water well or geothermal drilling
rig with a
diesel powered hydraulic power unit.  

'Standard Equipment':
Diesel engine:  liquid cooled with control panel and safety interlocks
Hydraulic Reservoir:  30 gallon steel with 10 micron filtration
Hands Free Drilling:  Yes
Downward Pressure on Drill Bit Enabled:  Yes
Rig lift prevention safety relief installed:  Yes
Counter Balance Valve installed:  Yes
Hydraulic valve stack:    Pressure gauge with adjustable main relief bypass installed
Drill rotation fine speed feathering control installed:  Yes
Top-Head downward pressure fine speed feathering control installed:  Yes
Swivel threads:  2-3/8" Mayhew Junior
Swivel pressure rating:   750 psi (51.71 bar)

Mast  structure:  Rectangular tubing with skid plate
Drill head Up/Down Drive system: Hydraulic motor direct ANSI chain drive     
Drill Pipe holding plate installed:      Yes
Drill Pipe supplied: 200 feet or +/- 61 meters of 2-3/8" Mayhew Junior drill pipe
Drill Pipe Length: Standard drill pipe length is +/- three meters
Bit sub:  Bit sub is included
Mud pump:  Hydraulic Variable Speed Centrifugal with suction hose and foot valve.

Trailer:  Custom manufactured 7' x 12' all steel 14,000 lb rated trailer with 12" I-beam
carriers and two 7000 lb axles.   Both axles equipped with electric brakes.  Trailer has
two rear and one front hydraulic operated leveling jacks.   Trailer has built in drill pipe
storage rack.   Trailer design may vary depending on the final shipping destination
Weight:   +/- 7,500 pounds / with Geothermal equipment weight is +/-8,500 pounds
Rig paint colors:  Yellow  and Black, Black and red, may vary.

Upgrades Available:
Mast extension Option:  Hydraulic actuated extension for installation of casing in 20
foot or 6 meter lengths.  Includes hydraulic powered winch for casing or drill pipe
handling.
Forced air hydraulic oil cooler:    
Hydraulic top joint wrenchless pipe breakout:    "FREE UPGRADE"
Twin piston mud, grout, and cement pump (red pump):
Swing away drill head for casing installation:
Geothermal grout pump with tremie hose reel:

On-board water tank:  65 gallon Installed when either Air Option is purchased
Available Hard Rock upgrades:
Air Option #1 - Includes standard Model Water-84 with  800 psi air line, high pressure
water injection pump with chemical feed, and a 4" hammer with a 5" hammer bit.  

Air Option #2 - Includes standard Model Water-84 with  800 psi air line, high pressure
water injection pump with chemical feed, and a 5" hammer with a 6" hammer bit.

Price and specifications subject to change without notice!
Geotechnical drilling equipment
Model Water-TCD shown with optional twin
piston mud pump (front red pump) and
associated high pressure lines (yellow lines).  
Special black rubberized coating and front
tongue toolbox is optional.

Standard color is Yellow with red swivel
Geothermal Drilling Rig with grout pump
Model Water-TCD  - Geothermal drill rig version.  
Shown with onboard grout pump/mixer and tremie
hose reel