Well Drilling rigs - WATER-99 hp

Drill2Water, LLC
Water Well Drilling Rig - 99 horsepower turbo diesel

Keywords: water drilling rig, well drilling rig, geothermal drilling rig, water well drilling, water well drilling rig, drill water well, portable drilling rig, drilling for water, water well
drilling equipment for sale, skidsteer drilling rig, bobcat drilling rig, down hole hammer, geothermal drilling equipment, borehole drilling equipment, 1a99TDHPU, portable
water drilling rig, drilling rigs for sale, Complete water well or geothermal drill rigs, drill pipe, drill bits, mud pumps, water swivel, and trailer, Drill through granite, with the
hard rock option

LIMITED WARRANTY

Every reasonable effort is made to guard against defective material or workmanship
entering into the manufacture of products by Drill2Water, LLC. However in the event of
failure or defective part within 12 months of purchase, our entire liability is limited to the
value of, or replacement of such defective part within that period.   Manufacturers of
components used may have warranties in excess of 12 months which may or may not
provide further coverage beyond our coverage. Drill2Water, LLC expressively disclaims
liability for incidental or consequential damages. Any modification to the manufactured
product not performed by manufacturer or without manufacturers written consent voids
any expressed warranty.   Drill2Water, LLC will not be responsible for bodily injury, loss of
life, loss of revenue, or property damage if such should occur in connection with the use of
our product.   No warranty is given on parts that are normally subject to rapid wear, such
as packing, wash pipes, wear bushing, stripper rubbers, springs, bearings, hydraulic
hoses, chain, mud pumps, drill bits, trailer brakes and tires, and hydraulic pumps. Seller’
s total responsibility for any claims, damages, losses or liabilities arising out of, or related
to, all products covered there under shall not exceed the purchase price of the parts.   A
warranty claim shall be filed and the defective item returned to Drill2Water, LLC at
customers expense.

99 hp Portable Turbo Diesel Powered Trailer Mounted Water Well Drilling Rig

Twin trailer setup- Drilling rig Trailer with separate 20 foot pipe and casing trailer

NEW

Model

WATER-

Basic model WATER-99 as described under standard equipment below with 800 psi
air line, and hammer oil injector. Switch over plumbing tree with high pressure
valves and check valve for mud or air drilling included.

Hard Rock Drilling Option #1 - Includes basic Model WATER-99 with new towable
650 cfm @ 200 psi (13.79 bar) air compressor, 5" downhole hammer and 6"
Concave hammer bit.

Hard Rock Drilling Option #2- Includes basic Model WATER-99 with new 700 cfm
@ 365 psi (25.17 bar) skid air compressor,   6" downhole hammer and 7" Concave
hammer bit.

Recommended Drilling Capacity:
Bore depth with Option #1 air compressor (5" tricone bit): 500 feet / 152 m
Bore depth with Option #1 air compressor (5" hammer bit): 500 feet / 152 m
Bore depth with Option #2 air compressor (6" hammer bit): 820 feet plus / 250 m +
Bore depth with on-board 2x3 centrifugal mud pump ( 9" bit): 400 feet plus / 122 m

Standard Equipment:
Engine:        Kubota 99 hp turbo diesel, electric start, glow plugs, with charging circuit
Engine monitoring: Hour meter, low oil shut down, high temperature shut down, RPMs
Fuel tank capacity:          Under deck steel 40 gallons with fuel gauge

Hydraulic pumps:          Dual gear pumps, 3000 and 2500 psi output
Hydraulic tank:          50 gallon with 10 micron filtration
Forced air hydraulic oil cooler:      Yes
Maximum Combined Hydraulic output:          56.00 gpm at 2500 psi
Hydraulic valve stack:          Adjustable pressure relief installed
Counter balance valve installed: Yes
Downward pressure fine speed feathering control: Yes, electro servo type
Drill rotation fine speed feathering control: Yes
Hands Free Drilling: Yes
Pressure gauges: System pressure and mud pump feed pressure

Maximum Lift and downward pressure torque:          30,000 inch pounds
Maximum thrust pipe pullback:        18,400 lbs
Drill rotation torque:        Top head - 8,538 inch pounds at 119 rpms at 2500 psi

Swivel rating:    2-1/2" watercourse / 750 psi / 10,780 lbs pulldown / 17,465 lbs pullback
Push casing capable:          Yes, 10 ft sections

Drill pipe:          500 feet' (49 ten foot sticks + two 5 ft sticks) 2-7/8" IF drill pipe
Drill bit included:          4-3/4" 3 wing carbide faced step bit.
Drill bit sub:          2-7/8" box to 2-3/8" API box and 2-7/8" box to 3-1/2" API box

Mast lifting and lowering cylinder:          Yes,
Downward pressure enabled:          Yes
Mast structure:          Rectangular tubing with 1/2 plate
Drilling Up/Down Drive system:   Hydraulic driven torque hub with double ANSI chain
Drill Pipe holding locks:          Yes, bowl and slip with pipe hold and lock
Hydraulic top joint pipe breakout option included:          Yes
Swing away drill head:          Yes
Hydraulic actuated Mast tower extension for 20 ft pvc casing installation:          Yes
Hydraulic casing winch line rating:   3000 lbs at 140 fpm
Submersible water pump, electrical cable installation capable:           Yes

Mud pump:         Hydraulic powered Piston pump or Variable speed centrifugal 2 x 3
Pump to swivel supply line, suction line, foot valve included:          Yes
Above ground mud box capable:   Yes
Prime mud pump hose bib:      Yes
On-board water tank: Yes / 100 gallons

Rig Trailer specifications:
Length:          19 ft (228 inches) (varies depending on shipping location)
Width:             7' 0" (84 inches) (varies depending on shipping location)
Weight:          +/- 12,650 lbs
Trailer:   Custom manufactured all steel trailer with 12" I-beam carriers and tandem axles.
All axles hubs equipped with electric or air brakes. Trailer has two rear hydraulic and two
front hydraulic leveling jacks.   Trailer bed is expanded metal and plate steel stitch welded to
all steel cross members.    Trailer has built in drill pipe storage rack.   Trailer design may
vary depending on the final shipping destination.

Pipe and Casing Trailer specifications:
Length:          20 ft deck (240 inches) (varies depending on shipping location)
Width:             7' 0" to 8' 6" (84 to 102" inches) (varies depending on shipping location)
Weight:          +/- 3500 lbs
Trailer (Drill Pipe and Casing): Custom manufactured all steel 20 ft trailer with 12" I-beam
carriers and tandem axles.   All axles hubs equipped with electric or air brakes. Trailer bed
is expanded metal stitch welded to all steel cross members.    Trailer has built in angled drill
pipe and casing storage racks.   Trailer design may vary depending on the final shipping
destination.

Rig paint scheme color: Industrial Yellow and black

Price and specifications subject to change without notice!

2-7/8" od drill pipe. Increases flow
through the tool joint by over 40% when
compared to a Mayhew Jr tool joint.

Click Here for more info.

Your choice: Now offering as an option a hydraulic powered large piston mud pump
capable of 100 gpm at 300 psi versus the standard 2x3 centrifugal pump for mud drilling.

VIDEO