Geothermal Drill Rig Model Water-84G

Drill2Water, LLC
Geothermal Drilling Rigs - Model Water-84G - 84 horsepower Turbo Diesel

Keywords: water drilling rig, well drilling rig, borehole drilling, geothermal drilling rig, water well drilling, water well drilling rig, drill water well, portable drilling rig, drilling for water, water well drilling equipment for
sale, skidsteer drilling rig, bobcat drilling rig, geothermal drilling equipment, portable water drilling rig, Geothermal Drilling equipment, Complete portable water well drilling rigs, geothermal drill rigs. Drill pipe, drill
bits, mud pumps, water swivel, and trailer. Water well machine, geothermal drilling rig

LIMITED WARRANTY

Every reasonable effort is made to guard against defective material or workmanship entering
into the manufacture of products by Drill2Water, LLC. However in the event of failure or
defective part within 12 months of purchase, our entire liability is limited to the value of, or
replacement of such defective part within that period.   Manufacturers of components used
may have warranties in excess of 12 months which may or may not provide further coverage
beyond our coverage. Drill2Water, LLC expressively disclaims liability for incidental or
consequential damages. Any modification to the manufactured product not performed by
manufacturer or without manufacturers written consent voids any expressed warranty.
Drill2Water, LLC will not be responsible for bodily injury, loss of life, loss of revenue, or
property damage if such should occur in connection with the use of our product.   No warranty
is given on parts that are normally subject to rapid wear, such as packing, wash pipes, wear
bushing, stripper rubbers, springs, bearings, hydraulic hoses, chain, mud pumps, drill bits,
trailer brakes and tires, and hydraulic pumps. Seller’s total responsibility for any claims,
damages, losses or liabilities arising out of, or related to, all products covered there under
shall not exceed the purchase price of the parts.   A warranty claim shall be filed and the
defective item returned to Drill2Water, LLC at customers expense.

Custom 84 hp turbo diesel

Loads into 20 ft standard shipping container with no disassembly required.
If an air compressor is also purchased a 40 ft container is required.

84 hp Turbo Diesel Powered Trailer Mounted Water Well Drilling Rig
One diesel engine - All hydraulic powered

Model Water-84G
Mud/Air Capable Drilling Rig

Pricing begins with the Standard Model Water-84G whose capabilities
are significantly increased depending on the additional Air Option #
selected.

$ - Standard model Water-84Gas described under 'Standard Equipment' below.
Includes 800 psi air line, hydraulic motor powered high pressure water injector
with foam injection, swing away drill head, tower extension, and casing winch.
Check valve for mud or air drilling is included.    Air compressor not included.

Recommended Drilling Capacity:
Bore depth with Option #1 air compressor (5" tricone bit): 400 feet / 122 m
Bore depth with Option #1 air compressor (5" hammer bit): 400 feet / 122 m
Bore depth with Option #2 air compressor (6" hammer bit): 400 feet plus / 122 m+
Bore depth with Option #3 air compressor (7" hammer bit): 500 ft plus / 152 m+
Bore depth with on-board 2x3 centrifugal mud pump (10" bit): 400 ft / 122 m

Standard Equipment:
Engine:   Liquid cooled Kubota 84 hp turbo diesel, electric start, glow plugs, with
charging circuit
Engine monitoring: Hour meter, low oil shut down, high temperature shut down,
RPMs
Fuel tank capacity:     Under deck steel 30 gallons with fuel gauge

Hydraulic pumps:    Dual gear pumps, 3000 and 2500 psi output
Hydraulic tank:     30 gallon with 10 micron filtration
Forced air hydraulic oil cooler installed:      Yes
Maximum Combined Hydraulic output:     48.00 gpm at 2500 psi
Hydraulic valve stack:     Adjustable pressure relief installed
Counter balance valve installed: Yes
Downward pressure on drill bit fine speed feathering control: Yes, electro servo
type
Drill rotation fine speed feathering control: Yes
Hands Free Drilling: Yes
Pressure gauges: System pressure and mud pump feed pressure

Drill rotation torque:        Top head - 8,538 inch pounds at 119 rpms at 2500 psi
Swivel rating:          2" inlet / 750 psi / 10,780 lbs pulldown / 17,465 lbs pullback
Push casing capable:          Yes, 10 ft sections

Drill pipe:   305 feet (30 ten foot sticks + one 5 foot stick) 2-7/8 IF drill pipe
Drill bit subs:          2-7/8" IF box to 2-3/8" API box and 2-7/8" IF box to 3-1/2" API
box

Mast lifting and lowering cylinder:          Yes,
Downward pressure on drill bit enabled:          Yes
Mast structure:          Rectangular tubing with 1/2" skid plate
Drilling Up / Down Drive system:     Hydraulic driven torque hub with double ANSI
chain
Drill Pipe holding locks:          Yes, bowl and slip with pipe hold and lock
Hydraulic top joint pipe breakout option included:          Yes
Swing away drill head:      Yes
Hydraulic actuated tower extension for 20 ft casing: Yes
Hydraulic casing winch line: Yes (3000 lbs at 140 fpm)
Water pump, electrical cable installation capable: Yes

High pressure water injector piston pump with soap injection: Hydraulic powered
variable speed and output rated 2.2 gpm at 1,000 psi
Mud pump:         Hydraulic motor powered variable speed 2x3 centrifugal
Pump to swivel supply line, suction line, foot valve included:          Yes
Above ground mud box capable:   Yes
Prime mud pump hose bib:      Yes

Trailer specifications:
Length:          19 ft (228 inches) (varies depending on shipping location)
Width:             7' 0" (84 inches)
Weight:          +/- 7650 lbs
Trailer:   Custom manufactured 7' x 12' all steel 14,000 lb rated trailer with 12"
I-beam carriers and two 7000 lb axles.   Both axles equipped with electric brakes.
Trailer has two rear and one front hydraulic leveling jacks.   Trailer bed is
expanded metal and plate steel stitch welded to all steel cross members.    Trailer
has built in drill pipe storage rack.   Trailer design may vary depending on the final
shipping destination.

Rig paint scheme color: White or Industrial Yellow and black

Air Options:
$ - Standard model Water-84G with Air Option #1- Includes standard Model
Water-84G with new towable 375 cfm @ 175 psi (12.07 bar) diesel powered air
compressor, and pulse adjustable hammer oil injector.

$ - Standard model Water-84G with Air Option #2 - Includes standard Model
Water-84G with new towable 650 cfm @ 200 psi (13.79 bar) diesel powered air
compressor, and pulse adjustable hammer oil injector.

$ - Standard model Water-84G with Air Option #3- Includes standard Model
Water-84G with new 700 cfm @ 365 psi (25.17 bar) skid or towable diesel powered
air compressor, and pulse adjustable hammer oil injector.

Price and specifications subject to change without notice!