Geothermal Drilling Rig Model GEO-46

Drill2Water, LLC
Geothermal Drilling Rigs - Model GEO-46 - 46 horsepower Diesel

Keywords: water drilling rig, well drilling rig, geothermal drilling rig, water well drilling, water well drilling rig, drill water well, portable drilling rig, drilling for water, water well drilling equipment
for sale, skidsteer drilling rig, bobcat drilling rig, borehole drilling, portable water drilling rig, portable Water Well Drilling rig and Geothermal Drilling equipment. Complete water well or
geothermal drill rigs, drill pipe, drill bits, mud pumps, water swivel, Water well geothermal drilling rig,

LIMITED WARRANTY

Every reasonable effort is made to guard against defective material or workmanship entering
into the manufacture of products by Drill2Water, LLC. However in the event of failure or
defective part within 12 months of purchase, our entire liability is limited to the value of, or
replacement of such defective part within that period.   Manufacturers of components used
may have warranties in excess of 12 months which may or may not provide further coverage
beyond our coverage. Drill2Water, LLC expressively disclaims liability for incidental or
consequential damages. Any modification to the manufactured product not performed by
manufacturer or without manufacturers written consent voids any expressed warranty.
Drill2Water, LLC will not be responsible for bodily injury, loss of life, loss of revenue, or
property damage if such should occur in connection with the use of our product.   No warranty
is given on parts that are normally subject to rapid wear, such as packing, wash pipes, wear
bushing, stripper rubbers, springs, bearings, hydraulic hoses, chain, mud pumps, drill bits,
trailer brakes and tires, and hydraulic pumps. Seller’s total responsibility for any claims,
damages, losses or liabilities arising out of, or related to, all products covered there under
shall not exceed the purchase price of the parts.   A warranty claim shall be filed and the
defective item returned to Drill2Water, LLC at customers expense.

46 hp Diesel Powered Trailer Mounted Geothermal Drilling Rig

Model GEO-46

Pricing begins with the basic model whose capabilities may be
significantly increased depending on an additional Option # selected.

Sales price: Price List for basic model GEO-46 as described under 'Standard
Equipment' below. Includes new on-board hydraulic powered grout pump for
geothermal bore grouting and a hydraulic powered reel in / reel out tremie hose
reel. Includes 3x3 gas powered mud pump.

Sales Price: Option #HR - (ENABLES RIG TO RUN DOWN THE HOLE HAMMER)
Includes basic model GEO-46 with 800 psi air line, high pressure water injector
with foam injection, and pulse adjustable hammer oil injector.   Check valve for air
drilling is included.   Air compressor not included.   Includes 3x3 gas powered mud
pump.

Sales price: Option #1- Includes basic model GEO-46 with new towable 375 cfm
@ 175 psi (12.07 bar) diesel powered air compressor.    Includes 800 psi air line,
high pressure water injector with foam injection, and pulse adjustable hammer oil
injector.   Check valve for air drilling is included.    Includes on-board 2x3
hydraulic powered variable speed mud pump.

Sales price: Option #2 - Includes basic Model GEO-46 with new towable 650 cfm
@ 200 psi (13.79 bar) diesel powered air compressor.    Includes 800 psi air line,
high pressure water injector with foam injection, and pulse adjustable hammer oil
injector. Check valve for air drilling is included.    Includes on-board 2x3 hydraulic
powered variable speed mud pump.

Sales price: Option #3 - Includes basic Model GEO-46 with new towable or skid
mounted 700 cfm @ 365 psi (25.17 bar) diesel powered air compressor.    Includes
800 psi air line, high pressure water injector with foam injection, and pulse
adjustable hammer oil injector. Check valve for air drilling is included.   Includes
on-board 2x3 hydraulic powered variable speed mud pump.

Recommended Drilling capacity:
Bore depth with Option #1, #2, or #3 air compressor (4-3/4" tricone bit):300 ft / 92 m
Bore depth with Option #1, #2, or #3 air compressor (4-3/4" hammer bit):300 ft/ 92m
Bore depth with mud pump (10" step bit):    300 ft / 92 m

Standard Equipment:
Engine: Liquid cooled Kubota 46 hp diesel, electric start, glow plugs, with charging circuit
Engine monitoring: Hour meter, low oil shut down, high temperature shut down, RPMs
Fuel tank capacity:          Above deck 12 gallons with fuel level indicator

Hydraulic pumps:          Twin gear pumps at 2500 psi and 3000 psi
Hydraulic tank:          30 gallon with 10 micron filtration
Forced air hydraulic oil cooler installed:      Yes
Maximum Combined Hydraulic output:          26.28 gpm at 2500 psi
Hydraulic valve stack:          Adjustable pressure relief installed
Counter balance valve installed: Yes
Downward pressure fine speed feathering control: Yes
Hands Free Drilling: Yes
Pressure gauges: System pressure

Drill rotation torque:        Top head - 5,838 inch pounds at 119 rpms at 2500 psi
Drill rotation fine speed feathering control: Yes

Geothermal grout pump hydraulic input:         10 gpm at 2000 psi
On-board hydraulic reel in / reel out tremie pipe hose reel:           Yes
Angle Drilling capable: Yes, with optional mast locks

Swivel rating:       1-1/2" inlet / 750 psi / 5,870 lbs pulldown / 6,700 lbs pullback
Push or pull casing capable:          Yes, 10 ft sections

Drill pipe: 200 feet (19 ten foot sticks plus two 5 foot sticks) 2-3/8" Mayhew Jr drill pipe
Drill bit included:     4-3/4" 3 wing carbide faced step bit
Drill bit sub:    2-3/8" Mayhew Jr box to 2-3/8" API box

Mast lifting and lowering cylinder:          Yes
Downward pressure enabled:          Yes
Mast structure:          Rectangular tubing with 1/2" skid plate
Drill head Up/Down Drive system:     Hydraulic driven direct chain drive
Drill Pipe holding locks:          Yes, bowl and slip with pipe hold and lock
Hydraulic top joint pipe breakout option included:          Yes

Mud pump:   9 hp 3x3 gas (Japanese manufacturer) or 2x3 hydraulic powered variable
speed with suction line and foot valve. Hydraulic powered variable speed 2x3 mud pump
installed when Option #1, #2, or #3 is purchased.

Trailer specifications:
Length:          19 ft (228 inches) (varies depending on shipping location)
Width:             7' 0" (84 inches)
Weight:          +/- 7150 lbs
Trailer:   Custom manufactured 7' x 12' all steel 14,000 lb rated trailer with 12" I-beam
carriers and two 7000 lb axles.   Both axles equipped with electric brakes. Trailer has two
rear and one front screw type manual leveling jacks.   Trailer bed is expanded metal and
plate steel stitch welded to all steel cross members.    Trailer has built in drill pipe storage
rack.   Trailer design may vary depending on the final shipping destination

Rig paint scheme color: White and black

Price and specifications subject to change without notice!

Loads into 20 ft standard shipping container with no disassembly required. If
an air compressor is also purchased a 40 ft container is required.